Herbistry420
Smoke / Vape / Blaze

DynaVap Bonger Drill Mod: 5 Steps to Add an Airport for Huge Clouds

If you own a DynaVap and a Bonger, this dynavap bonger drill mod might be the most satisfying upgrade you ever make. By drilling a small airflow hole — an "airport" — into the side of your Bonger, you unlock massive vapor production and full control over your clouds. This guide walks you through the ...

If you own a DynaVap and a Bonger, this dynavap bonger drill mod might be the most satisfying upgrade you ever make. By drilling a small airflow hole — an “airport” — into the side of your Bonger, you unlock massive vapor production and full control over your clouds. This guide walks you through the exact steps to do it safely.

What Is the DynaVap Bonger Drill Mod?

The dynavap bonger drill mod is a DIY modification where you drill a small hole into the side of your DynaVap Bonger to create an airport — an airflow control point. Inspired by a tip from Reddit user MidnighT0k3r after the original Hyper-Bonger combo video, this hack lets you cover and uncover the hole with your finger to control how much fresh air mixes into each hit. The result? Bigger, smoother, more controlled vapor clouds.

5 Steps to Perform the DynaVap Bonger Drill Mod

  1. Gather your tools — You need a small drill bit (ideally carbide-tipped for glass), a steady hand, and eye protection. Mark your spot on the side of the Bonger where airflow would feel natural to your finger.
  2. Secure the Bonger — Place it on a stable surface with a towel underneath. Never rush this step. Drilling glass requires patience and slow speed.
  3. Drill slowly at low speed — Use constant water lubrication on the drill point to reduce heat and cracking risk. Apply gentle, consistent pressure. The dynavap bonger drill mod fails most often due to going too fast.
  4. Smooth the edges — Use fine-grit sandpaper or a diamond file to remove sharp edges from the hole so it is comfortable on your finger and airtight when covered.
  5. Test the airflow — Reassemble your DynaVap setup, cover the airport with your finger, and take a slow rip. Uncover mid-hit to clear the chamber. The difference in cloud size is immediate.

Gear Used in This DynaVap Bonger Drill Mod

This mod works best with the full Hyper setup. Save 10% using coupon code Herbistry at DynaVap on all items below:

Hyper Cap — https://bit.ly/44EeTjv

Hyper Tip — https://bit.ly/4mzPr5t

DynaVap Bonger — https://bit.ly/4dnVrtI

Save 15% at BlackLeaf with coupon code herb420:

Black Leaf Glass Rigs — https://bit.ly/443RMPb

Safety Warnings for the DynaVap Bonger Drill Mod

Before you try this dynavap bonger drill mod, understand the risks:

  • Drilling glass wrong can shatter the Bonger entirely — wear eye protection
  • Removing the condenser affects tip stability — be careful not to burn your fingers
  • This is NOT an officially approved DynaVap modification
  • Go slow, use water cooling, and proceed at your own risk

Learn More

Check out more DynaVap reviews and vaporizer content on Herbistry420:

Frequently Asked Questions

Is the DynaVap bonger drill mod reversible?
No. Once you drill the hole, the modification is permanent. Make sure you are committed before starting.
What drill bit should I use for the dynavap bonger drill mod?
Use a carbide-tipped or diamond-coated drill bit sized 3-5mm. These are available at most hardware stores and are specifically designed for glass drilling.
Does the airport mod actually make bigger clouds?
Yes — the airflow control lets you restrict the draw and then flood the chamber at the end of a hit, producing noticeably thicker vapor. It is one of the most effective DynaVap upgrades you can do at home.
Will this void my DynaVap warranty?
Almost certainly yes. This dynavap bonger drill mod is a user modification and is not endorsed or supported by DynaVap. Proceed understanding that any warranty coverage may be voided.

References

  1. DynaVap Official Site
  2. r/DynaVap on Reddit

Where to Buy

Some links above are affiliate links. We may earn a commission at no extra cost to you.

Share

Related Posts