DoseCraft
VapeHeatLabCustom Chocolate Mold DIY Part 1: Easy 3D Print Guide
Welcome to custom chocolate mold diy part 1 — the first episode in Fordee's multi-part series on how to make custom chocolate molds for cannabis edibles at home. This part covers everything before the silicone: modeling the blank in 3D software, printing it on a resin or FDM printer, and sealing it for the pour. ...
Welcome to custom chocolate mold diy part 1 — the first episode in Fordee’s multi-part series on how to make custom chocolate molds for cannabis edibles at home. This part covers everything before the silicone: modeling the blank in 3D software, printing it on a resin or FDM printer, and sealing it for the pour. If you are looking for how to make molds for edibles from scratch, this is where you start.
Custom Chocolate Mold DIY Part 1: What Is a Mold Blank?
A mold blank is the positive master object — the physical shape you want your chocolate to take. The silicone poured around it in Part 2 picks up every surface detail, creating the negative cavity you pour chocolate into. For this custom chocolate mold diy part 1 project the blank is a 10×5 cm rectangular bar with “420” subtracted from the face — the perfect shape for infused cannabis chocolate bars.
How to Make Custom Chocolate Molds: 9-Step 3D Design
Here is how to make custom chocolate molds starting from scratch in Cinema 4D. The same technique works in Blender (free) or any other 3D app that supports volumetric modeling:
- Open Project Settings (Cmd+D / Ctrl+D) and change scale from centimetres to millimetres.
- Create a Rectangular Spline — width 100 mm, height 50 mm. Enable corner rounding and set radius to 7 mm for a classic candy bar edge.
- Apply an Extrude to the spline — set depth to 10 mm (1 cm).
- Create a Text Spline — type “420”, set height to 50 mm. Center it on the rectangle using Tools → Arrange Objects → Center.
- Apply a second Extrude to the text — set depth to 5 mm.
- Create a Volume Builder. Drag the rectangle extrude in as the base layer (Union) and the text extrude in above it set to . This hollows the “420” from the bar face.
Related Posts
Easy Cannabis Infused Spaetzle Recipe (Cooking with Cannabutter) | Herbistry420
Easy Cannabis Infused Spaetzle Recipe (Cooking with Cannabutter) This cannabis infused spaetzle recipe transforms a classic German comfort dish into a potent homemade edible. Spaetzle is a soft egg pasta that works well for cannabis cooking because the dough readily absorbs infused fats. You can make this weed spaetzle using cannabutter for pan-frying or infused ...
How to Make AVB Tea: A Simple Guide to Using Already Vaped Bud for Edibles
AVB tea is one of the simplest ways to use up already vaped bud rather than discarding it. AVB — also written as ABV — is the cannabis material left inside a vaporizer after a session. Because vaporization activates cannabinoids through heat, AVB is already decarboxylated and ready to consume without any additional cooking step. ...
Blueberry Ice Cream Recipe — 5 Steps to Creamy Perfection
This blueberry ice cream recipe produces real, creamy homemade blueberry ice cream using simple ingredients and either a churned or no-churn method. It also doubles as a cannabis ice cream recipe — by infusing the heavy cream beforehand, you can make cannabis infused blueberry ice cream with the same base and no extra steps. Blueberry ...
Infused Eggplant Dip (Baba Ganoush) Recipe with Cannabis Olive Oil
This infused eggplant dip is a cannabis twist on baba ganoush — the creamy, smoky Middle Eastern dip made from roasted eggplant, tahini, lemon, garlic, and spices. The infusion is added through the olive oil, making it simple to dose and easy to skip if you prefer a non-infused version. Fordee roasted his eggplants in ...