Small Batch Cannabis Coconut Oil: 200ml Infusion With POT by Noids

Making small batch cannabis coconut oil doesn’t require a big setup or a full ounce of flower. This guide walks you through a 200ml infusion using the POT by Noids — the fastest and easiest method for a small batch cannabis coconut oil that’s ready to use in soap, edibles, coffee, or whatever you have planned.

Why Make Small Batch Cannabis Coconut Oil?

Sometimes you only need a small amount of infused oil for a specific recipe. A small batch cannabis coconut oil approach lets you control potency, reduce waste, and infuse quickly without setting up a full kitchen operation. Using 200ml of coconut oil with 10 grams of decarbed cannabis flower gives a manageable yield — about 7mg THC per millilitre at 20% THC flower. Use a dosage calculator like scientificedibles.com to dial in your own numbers.

What You Need for Small Batch Cannabis Coconut Oil

• 200ml coconut oil
• 10 grams decarbed cannabis flower (ground for better infusion)
• Lecithin granules (slightly less than 1 tablespoon for 200ml)
• POT by Noids infusion device

5 Steps to Make Small Batch Cannabis Coconut Oil

Step 1 — Decarb and Grind Your Flower

Before anything else, decarboxylate your cannabis flower to activate the THC. Then grind it — the POT by Noids doesn’t stir the material, so grinding expands the surface area and allows the trichomes to infuse into the coconut oil more effectively. Don’t skip the grind if you want good potency.

Step 2 — Add Cannabis and Coconut Oil to the POT by Noids

Load the ground cannabis flower into the POT by Noids canister first, then pour in all 200ml of coconut oil. The small batch cannabis coconut oil fits comfortably in the device — no overflow issues at this volume.

Step 3 — Add Lecithin in Cannabis Oil

Add a little less than a full tablespoon of lecithin granules for your 200ml batch. Using lecithin in cannabis oil serves two purposes: it improves distribution of cannabinoids throughout the infusion, and when consumed, it can also help your body absorb THC more efficiently. Since the oil will be heated, the granules dissolve easily.

Step 4 — Set the POT by Noids for THC Infusion

Put the lid on the device, rotate the setting to the THC diamond position (for THC-dominant strains), and press start. The POT by Noids cannabis coconut oil infusion takes about 2 hours. Set it and walk away — the device will pulse a green light and ding when done. For CBD-dominant strains, use the CBD setting instead.

Step 5 — Strain and Store Your Cannabis Coconut Oil Recipe

When the device finishes, use the built-in filter cap to press the infused oil into your storage container. The glass body gets hot — use a silicone glove or oven mitt. Press all the way down to squeeze out every drop. The oil will be dark when liquid but lightens as it solidifies. Your small batch cannabis coconut oil is ready to use in your cannabis coconut oil recipe — edibles, soap, coffee, toast, brownies, or whatever you like.

Tips for Infused Coconut Oil for Edibles

When using infused coconut oil for edibles, calculate your dose carefully. At 10g of 20% THC flower in 200ml oil, you get roughly 7mg per millilitre. Always start low if you’re new to edibles. The lecithin in cannabis oil recipe also improves bioavailability, so effects may feel stronger than expected even at lower doses. You can also save the strained plant pulp and reuse it in another recipe.