Rosin Puck Cannabutter: Turn Spent Rosin Chips Into Potent Butter
This rosin puck cannabutter recipe turns your leftover decarbed rosin chips into a fully infused ghee or butter using the POT by Noids infusion device. If you've pressed rosin and have rosin pucks sitting around, don't throw them away — they still contain cannabinoids and make excellent infused butter. This guide covers the full process ...
This rosin puck cannabutter recipe turns your leftover decarbed rosin chips into a fully infused ghee or butter using the POT by Noids infusion device. If you’ve pressed rosin and have rosin pucks sitting around, don’t throw them away — they still contain cannabinoids and make excellent infused butter. This guide covers the full process in 5 easy steps, plus a quick Butter Vault review at the end.
What You Need for the Rosin Puck Cannabutter Recipe
- Decarbed rosin chips (rosin pucks from previous pressing — must be decarboxylated first)
- 103–113g of ghee or regular butter (approximately 1 stick)
- POT by Noids infusion device
- Oven mitt (the glass body gets hot)
- Butter Vault by Noids (for storage) — optional but convenient
Note: This rosin puck cannabutter recipe requires your rosin chips to be decarbed first. If you haven’t decarbed your rosin pucks yet, watch the Decarb Rosin Puck video before starting this one.
5 Steps to Make Rosin Puck Cannabutter
Step 1 — Add Decarbed Rosin Chips to the POT by Noids
Remove the infusion canister from the POT by Noids and load the decarbed rosin chips inside. The device has measurement markings on the side, so you can track how much material you’re using. Adding the rosin chips first makes it easier to pour in the butter without disturbing the chips.
Step 2 — Add Ghee for Cannabis Infusion
For this rosin puck cannabutter recipe, ghee (clarified butter) was used rather than regular butter. Ghee works great for this POT by Noids butter infusion because it has a higher smoke point and a cleaner fat base. Add approximately 103g of ghee — that’s just under one standard stick (113g). Pour the ghee over the rosin chips in the canister. Put the lid on and load it into the device.
Step 3 — Set the POT by Noids to THC Mode and Start
Plug in the POT by Noids and set the infusion dial to the THC diamond setting (for THC-dominant material). The device measures internally and automatically manages the temperature — no manual monitoring needed. It does not have a built-in timer display, so just walk away. The decarbed rosin chips cannabutter process takes approximately 1.5–2 hours. You’ll know it’s done when the pulsing green light turns to a solid white light, and the device beeps.
Step 4 — Press and Strain the Infused Butter
Once done, switch the device to the power-off position and carefully remove the canister (use an oven mitt — the glass is hot). Place the strainer attachment on top and press it down to filter the spent rosin chips from the liquid butter. The decarbed rosin chips cannabutter will come out as a dark, fully infused liquid.
Step 5 — Pour into Butter Vault and Refrigerate
Pour the strained infused butter directly into the Butter Vault Noids review container — a stainless steel storage unit with a metal lid designed for easy scraping. Put it in the freezer to harden quickly, then transfer to the fridge. Once hardened, you can use the metal lid to scrape small portions onto toast, into recipes, or anywhere you’d use regular cannabutter. This rosin puck cannabutter recipe produces a noticeably cannabis-flavored butter, so dose carefully.
Rosin Puck Cannabutter Dosing Notes
The potency of your rosin puck cannabutter recipe depends entirely on the THC percentage of your original rosin and how much material you used. Since rosin pucks have already had most of the concentrate extracted, they are lower potency than fresh rosin — but still active and worth using. Use an edible dosage calculator to estimate your cannabutter’s strength based on your starting rosin’s THC percentage.
Butter Vault Noids Review
The Butter Vault by Noids is a compact, stainless steel butter storage container designed to work with single-batch infusions from the POT by Noids. It holds just over one stick of butter. The highlight feature: the metal lid doubles as a butter scraper, letting you portion out small amounts directly onto toast without getting into a jar. The bottom is silicone for stability. It’s not a required part of this rosin puck cannabutter recipe, but it makes storage and daily use genuinely convenient.
Frequently Asked Questions
Do rosin pucks need to be decarbed for cannabutter?
Can I use regular butter instead of ghee for cannabis infusion?
How long does rosin puck cannabutter last?
References
Where to Buy
- POT by Noids (Direct Link)affiliate5% with code herbistry420
- Cannabis Apparel Store
Some links above are affiliate links. We may earn a commission at no extra cost to you.
Related Posts

DynaVap M7 XL Stealth Review: Titanium Tip, Torch and IH3.0 Timing Tested
Hands-on DynaVap M7 XL Stealth review: torch and YLLVape IH3.0 timings, titanium vs stainless steel differences, and whether the Stealth is worth the upgrade from a standard M7 XL.

This App Is About to Change Edibles Forever | DoseCraft Full Walkthrough
DoseCraft is a free iOS and Android app for cannabis edible makers, with a dosage calculator, 140+ recipes, infusion tracking, label printing, and a journaling feature. Hosted here after YouTube took the original video down.

Best Vape Heat Lab App Review — 5 Features Every Vaper Needs
This Vape Heat Lab app review covers every feature of the free vaporizer companion app designed to transform your sessions from guesswork into precision. Whether you just picked up your first dry herb vape or you have been chasing perfect clouds for years, this Vape Heat Lab walkthrough shows you the tools to track, learn, ...

Pax Flow Vaporizer Review: Finally a Pax With Real Airflow
PAX Flow Vaporizer Review The PAX Flow is a compact dry herb vaporizer designed for portability without sacrificing performance. This PAX Flow vaporizer review explains airflow, heating style, battery life, and who the device is best suited for. PAX devices are known for their discreet design, but earlier models were sometimes criticized for limited airflow ...
